 |
| Quantity: | |
|---|---|
Semi-finished bearings, raceway turning bearings, forged rings for bearings
Three Workshops of ROLLED RING MILL:
Φ1600mm, Φ2800mm and φ5000mm
Allow Rongcheng can manufactures seamless hot rolled rings, ranges from OD500mm to OD4500mm, face height up to 400mm and weights up to 5000 KGS.
Beside Straight / Contoured rolled rings, we also produce profiled hot rolled rings to save the input weight for our customers.
Heat Treatment Workshops for the forged rings:
Two workshops for the rings below OD2000mm and for the rings over OD2000mm.
Normalizing, Quench and Tempering, Annealing can be done as per customers' required on the forged rings.
Machining / Turning Workshops
Proof turning on the forged rings including step shape turning.
Besides, in 2016, Rongcheng establish precision machining workshop for the wind power Pitch / Yaw's bearings inner and outer ring: raceway turning, radial holes drilling, mounting holes, lifting holes, grease holes and etc.
Semi-finished bearings, raceway turning bearings, forged rings for bearings
Three Workshops of ROLLED RING MILL:
Φ1600mm, Φ2800mm and φ5000mm
Allow Rongcheng can manufactures seamless hot rolled rings, ranges from OD500mm to OD4500mm, face height up to 400mm and weights up to 5000 KGS.
Beside Straight / Contoured rolled rings, we also produce profiled hot rolled rings to save the input weight for our customers.
Heat Treatment Workshops for the forged rings:
Two workshops for the rings below OD2000mm and for the rings over OD2000mm.
Normalizing, Quench and Tempering, Annealing can be done as per customers' required on the forged rings.
Machining / Turning Workshops
Proof turning on the forged rings including step shape turning.
Besides, in 2016, Rongcheng establish precision machining workshop for the wind power Pitch / Yaw's bearings inner and outer ring: raceway turning, radial holes drilling, mounting holes, lifting holes, grease holes and etc.
Note: Recommended image size is 150px*50px 
